Disinfection is a very important part of daily production in various segments. Not only in these challenging times of a global pandemic, but also during normal operation or production. In this article, we will look at how large companies, retail chains as well as smaller cafes and restaurants can effectively disinfect their working environment and keep employees and customers healthy and safe.
Cooling and humidifying the air along with disinfection
We’ve come up with an innovative disinfection solution that will save you costs while making your working environment more pleasant.
Our company has been in the market for years in the field of cooling and humidifying indoor or outdoor areas for businesses and homes. At the same time, we strive to increase the efficiency of our clients’ production processes. Humidifying and cooling with our adiabatic systems saves our clients yearly costs, energy, improves the health of employees, all with respect to nature. Read more in our article: How we got “mountain air” into production.
In short, it is the cooling of spaces with water vapour, which evaporates immediately. The cold water spray draws heat from the surroundings and uses it for its own evaporation. Thanks to the instantaneous evaporation of the water, you can cool the space by up to 8 to 10°C and increase the humidity to the desired values without leaving people and machines wet or damp.
We can fill our adiabatic systems with a non-hazardous disinfectant that, while cooling and humidifying the space, disinfects the entire space and everything in it, including people, machines and air.
Chlorine-free disinfectants reliably and effectively eliminate microbiological contamination of the disinfected water without odour or harmful effect on the environment. The disinfection process requires a complex technology of measuring the concentration of the solution, the content of active substances and must be controlled according to the manufacturers’ regulations. Otherwise, the disinfection process may not be effective.
The disinfectant can be added automatically using dosing technology. The dosing is precise and controlled by an electronic system. All our existing systems can be supplemented with an automatic disinfectant dosing system. The plants can be stand-alone or portable plants for temporary operation.
Advantages over manual workplace disinfection
Our biological solution is certified and designed for spraying. Spraying can also take place in the presence of people, i.e. also during production/operation. The disinfectant solution does not irritate the eyes, does not cause skin redness and is not harmful if inhaled. It is therefore also intended and suitable for the disinfection of persons. It has all certificates and is also registered with the Ministry of Economy of the Slovak Republic. The same latices are also used as preventive measures in other EU countries, Asia and the USA, where the effectiveness of these disinfectant solutions has been proven.
Chief Chemist’s statement for our products
“Sprayed aerosol particles have good buoyancy characteristics and spread easily throughout the space. After a few minutes, the ultra-fine droplets settle and wet all surfaces inside the treated area. The thin film of disinfectant used disinfects the surface and leaves no visible deposits. The very fine aerosol spreads to all parts of the room, including corners and hard-to-reach areas, leaving a thin film of disinfectant on surfaces. Electrically charged ions completely fill the treated area. This system guarantees an even distribution of disinfectant particles on all surfaces in the room, from door handles to computer keyboards.”
A unique and innovative solution
Aerosol disinfection is a useful and permanent addition to conventional types of applications. It does not replace cleaning or conventional wipe disinfection, but is a preventive measure. If you already have any of our adiabatic systems from us, it is very easy to add such disinfection. If you don’t have one, read all the advantages of our systems, which will save you a considerable amount per year, while increasing the efficiency of machines, employees and generally improving working conditions.